Questions to Ask Before Throwing Money at Your First PCB Manufacturer
This article will be helpful for everyone who is thinking to choose his/her first PCB manufacturer without losing his or her thoughts and money. A good man PCB manufacturer ensures the quality of both the PCB fabrication process and PCB assembly process in PCB manufacturing. In this article, I am going to tell you about the five Questions that are necessary to ask before investing money in PCB manufacturing.
Many PCB manufacturers are working in the market so; it is hard for people to choose a manufacturer who ensures the quality of the product at reasonable prices. Not all manufacturers are doing the same work. but it is a reality that there’s not any “best” PCB manufacturer because it depends on how much you can pay for manufacturing Vs. what are your design specs?
Questions to Ask from Manufacturer before Spending Money on PCB Manufacturing
Some of the questions that you can ask from the manufacturers are mentioned below:
- When will I get my board back?
The answer to this question depends on the fact that how much money you have to spend on PCB manufacturing. You can get your board back as soon as you spend. Like if you want your board on an urgent basis then the manufacturer demands more money from you. In this situation, you will get what you pay for. If you need a board to be delivered in 3-5 days, this adds a little more money to your budget to make it happen. Following are some manufacturer who can make PCB for you and ensures quality as well:
OSH Park: if you want to keep the cost low then OSH Park is the best option for you. They delivered the order in 12 days for a 2-layered board.
Advanced Circuits: it is one of the most famous fab houses in the United States. They deliver 1-10 layered PCB boards in 1-5 days.
Euro Circuits: it is another one of the best fab houses. They delivered 1-16 layered boards in 2-7 days.
- Can you arrange and source all the required material for me?
If you want to save your time and effort and want to prevent the annoyance of managing the bills of material (BOM), you should ensure that website developer your selected PCB manufacturer has an in-house buying department that may handle all of the BOM for you.
If you want them to do this, then you need to add a bit more money to your budget.
- Can you work with my board specs?
One of the important questions to ask low-cost PCB manufacturers, who will limit the data they will accept in your board specs? If you want them to manufacture your PCB according to the given specs and instructions, you need to pay a bit more to them. Ensure that the selected manufacturer will handle all of your specs and documents.
- Where are you sourcing the material required for the PCB board?
You should also ask this question from the PCB manufacturer. You should ensure that whether they source quality material or not. Your board will also need to meet the specific regulations so; you should avoid hazardous materials that are restricted in electronics manufacturing like lead, cadmium, mercury, and fire retardants.
- Will you test my board or not?
You should also ask manufacturers whether they test your board after manufacturing or not. It helps you to avoid errors later. So, ask your manufacturer for testing the board.
Questions to Ask Before Throwing Money at Your First PCB Manufacturer
This article will be helpful for everyone who is thinking to choose his/her first PCB manufacturer without losing his or her thoughts and money. A good man PCB manufacturer ensures the quality of both the PCB fabrication process and PCB assembly process in PCB manufacturing. In this article, I am going to tell you about the five Questions that are necessary to ask before investing money in PCB manufacturing.Questions to Ask Before Throwing Money at Your First PCB Manufacturer
Many PCB manufacturers are working in the market so; it is hard for people to choose a manufacturer who ensures the quality of the product at reasonable prices. Not all manufacturers are doing the same work. but it is a reality that there’s not any “best” PCB manufacturer because it depends on how much you can pay for manufacturing Vs. what are your design specs?
Questions to Ask from Manufacturer before Spending Money on PCB Manufacturing
Some of the questions that you can ask from the manufacturers are mentioned below:
- When will I get my board back?
The answer to this question depends on the fact that how much money you have to spend on PCB manufacturing. You can get your board back as soon as you spend. Like if you want your board on an urgent basis then the manufacturer demands more money from you. In this situation, you will get what you pay for. If you need a board to be delivered in 3-5 days, this adds a little more money to your budget to make it happen. Following are some manufacturer who can make PCB for you and ensures quality as well:
OSH Park: if you want to keep the cost low then OSH Park is the best option for you. They delivered the order in 12 days for a 2-layered board.
Advanced Circuits: it is one of the most famous fab houses in the United States. They deliver 1-10 layered PCB boards in 1-5 days.
Euro Circuits: it is another one of the best fab houses. They delivered 1-16 layered boards in 2-7 days.
- Can you arrange and source all the required material for me?
If you want to save your time and effort and want to prevent the annoyance of managing the bills of material (BOM), you should ensure that website developer your selected PCB manufacturer has an in-house buying department that may handle all of the BOM for you.
If you want them to do this, then you need to add a bit more money to your budget.
- Can you work with my board specs?
One of the important questions to ask low-cost PCB manufacturers, who will limit the data they will accept in your board specs? If you want them to manufacture your PCB according to the given specs and instructions, you need to pay a bit more to them. Ensure that the selected manufacturer will handle all of your specs and documents.
- Where are you sourcing the material required for the PCB board?
You should also ask this question from the PCB manufacturer. You should ensure that whether they source quality material or not. Your board will also need to meet the specific regulations so; you should avoid hazardous materials that are restricted in electronics manufacturing like lead, cadmium, mercury, and fire retardants.
- Will you test my board or not?
You should also ask manufacturers whether they test your board after manufacturing or not. It helps you to avoid errors later. So, ask your manufacturer for testing the board.